A smarter approach to bilateral oral fluid evacuation, designed for the way dental professionals work.
Select a part to enlarge it and see what it does.
Video or graphic coming soon
Select a part, or a pulsing dot, to enlarge it and see what it does. All three parts are autoclavable and reusable.
Saliva is produced on both sides of the mouth. Swivial pairs two standard, pre-contoured saliva ejectors in one joining device, so they swivel, rotate and dial into position independently along shared bilateral planes. A slide-on chin retainer holds everything in place for hands-free operation.
Use the Ejector Former to give two standard saliva ejectors matching, mirror-image curves.
Fit both ejectors into the Ejector Joiner so they sit side by side.
Insert the Ejector Joiner into the chairside SE or HVE valve, and adjust vacuum force at that valve.
Slide on the Chin Retainer so Swivial stays in place and both hands stay free.
One complete kit in a clear, lift-lid box, built around the three reusable parts.
Join two ejectors and connect to the chairside valve.
Slide on to hold Swivial in place, hands-free.
Shape standard ejectors into matching curves.
Nylon brush for cleaning the Ejector Joiner lumens.
Setup, placement, cleaning and FAQ.
Saliva ejectors are not included. The complete kit is $58, and every part can also be ordered on its own. Order now.
The complete kit comes in a clear, lift-lid box with everything you need to start. Saliva ejectors are not included.
8 Ejector Joiners, 4 Chin Retainers, 4 Ejector Formers, 1 lumen brush and the information booklet. Every part is also available on its own, and you choose what you need at checkout.
Kit: $58.00
Secure checkout. Shipping and tax are shown before you pay. Questions? Contact us.
All three components are autoclavable and reusable, which cuts down on environmental waste. Follow these steps after each patient.
Discard both single-use saliva ejectors.
Separate the Ejector Joiner, Chin Retainer and Ejector Former, then rinse them and flush every lumen.
Immerse the parts in a compatible neutral-pH or enzymatic detergent, following the detergent maker's instructions.
Use the nylon lumen brush on each inlet and the common outlet of the Ejector Joiner, and on the outer surfaces of the other two parts. Then place them in an ultrasonic bath.
Flush with water until no soil or detergent is visible. Dry and inspect each part. Discard any part that is distorted, damaged or cannot be cleaned.
Pouch or cassette the parts and steam-sterilize with the validated cycle for this device. [add validated cycle]
Swivial can be used across hygiene and restorative care, and it complements procedures that use a rubber dam. It connects into any existing HVE line or Saliva Ejector Valve.
Swivial keeps the patient's mouth clear of saliva and fluids during dental procedures. Its dual saliva ejector system suctions independently from a common joining tube.
It holds two standard saliva ejectors side by side, so each one works separately within the same sleeve for better coverage and comfort.
It bends saliva ejectors into matching, symmetrical shapes, so both fit and work the same way when they are positioned together in the Ejector Joiner.
It holds the device securely in the patient's mouth without manual help, which frees the clinician for other tasks and eases fatigue during long procedures.
Yes. It is lightweight, easy to attach and remove, suits a range of patient sizes and shapes, and adjusts to different vertical dimensions.
Mostly yes. Standard ejectors work, though diameter and head shape matter. Practices that already use saliva ejectors will find the change simple and low cost.
No, ejectors are not included.
All Swivial components are reusable and can be autoclaved. See the care steps above.
Yes, it uses Analene HPP12-HT that is a polypropylene plastic, minimizing the risk of allergic reactions and meeting industry safety standards.
Yes. We want you to be fully satisfied with your purchase. You can request a return within 30 days of delivery.
To qualify for a standard return, products must be:
For hygiene and safety reasons, we cannot accept standard returns of products that have been used, placed in a patient's mouth, or had their seals opened or damaged. This does not affect your ability to report a defective, damaged or incorrectly shipped product. Just contact us and we will make it right.
Original shipping charges are nonrefundable unless the return is due to our error or a defective product. There is no restocking fee for eligible returns.
How to return an item:
Yes. Every part can be ordered on its own, so you can replace Ejector Joiners, Chin Retainers, Ejector Formers or the lumen brush without buying a whole kit. The complete kit is $58.
At the chairside valve where the Ejector Joiner is inserted, either the SE valve or the HVE valve.
Numbers match the pictures from left to right. HVE is high-volume evacuation and SE is saliva ejector. Not sure which one matches your chair? Contact us and we will help you check.